[Elecraft] K3 firmware upgrade via Microham MKII

Richard Thorne rmthorne at suddenlink.net
Wed Oct 21 07:11:06 EDT 2009


Thats the only bummer about he MKII. On my operating table its a bit of 
a challenge to have to swap out cables on the back of the rig.  I guess 
an extension off of the K3 could be made so one doesn't have to drag the 
rig out to make the change.

Rich - N5ZC


Joe Subich, W4TV wrote:
>   
>> Can the Microham MKII be used to do the K3 Firmware upgrade.  
>>     
>
> No.  
>
> You might get lucky with a complicated set-up;  set Radio to 
> "No Radio," use only one CAT port, set the K3 to 38,400 bps and 
> set the K3 Utility to "keep speed at 38,400 bps.  However, the 
> chance of errors is so high that it is not worth the risk. 
>
> I keep a real serial port/cable handy for firmware updates and 
> I've still had intermittent upload failures. 
>
> 73, 
>
>    ... Joe, W4TV 
>  
>
>
>
>   
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net 
>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of John Gaynard
>> Sent: Tuesday, October 20, 2009 10:21 PM
>> To: elecraft at mailman.qth.net
>> Subject: [Elecraft] K3 firmware upgrade via Microham MKII
>>
>>
>> Can the Microham MKII be used to do the K3 Firmware upgrade.  
>> I know it was possible but after the loader was originally 
>> upgraded there was a possible glitch that would cause the 
>> firmware load to fail.  My firmware is at 2.38 and I think it 
>> is time to come out of the Dark Ages once again.
>>
>>  
>>
>> John
>>
>> K8WDN K3 #157
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>     
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.423 / Virus Database: 270.14.24/2449 - Release Date: 10/20/09 18:42:00
>
>   


More information about the Elecraft mailing list