[Elecraft] Split reminder

[The Smiths]

Okay fair enough, don't have it blink... Have the display change freq. like most other rigs out there.. that's what I was after in the first place.. LOL.. Or I guess you could at least blink the little B (or the arrow) indicating that you're in a split mode. I'm just after something to Draw the attention to the user so they know they're still in that mode.  
 
> CC: elecraft at mailman.qth.net
> From: jplan at jeffnet.org
> To: notforchat at hotmail.com
> Subject: Re: [Elecraft] Split reminder
> Date: Mon, 19 Oct 2009 14:21:23 -0700
> 
> With all due respect, it's not the SAME EXACT indication.
> 
> When RIT is on and you're not in split mode:
> 1). The RIT indicator on the LCD is on. The SPLT indicator is off.
> 2). The TX arrow on the LCD is pointing to A
> 3). One of the LEDs above the RIT knob is lit.
> 4). The delta-F LED on the left hand side is lit.
> 
> When in split mode and with RIT off:
> 1). The SPLT indicator on the LCD is on. The RIT indicator is off.
> 2). The TX arrow on the LCD is pointing to B
> 3). All the LEDs above the RIT knob are dark
> 4). The delta-F LED on the left hand side is lit.
> 
> 1 out of 4 indications is the same. The other 3 are different.
> 
> Plus, what would you have the delta-F LED do if you have RIT on while 
> in SPLIT mode?
> 
> 73
> --
> Joe KB8AP
> 
> 
> On Oct 19, 2009, at 1:38 PM, The Smiths wrote:
> 
> > As we already agreed, the RIT can put this rig into the SAME EXACT 
> > indication that it's in Split mode. Actually fooling the user.
> >
> 
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/