[Elecraft] Split operation

[Arie Kleingeld PA3A]

Ed,

I agree with you on this. The way you describe it, That's the way I always
do it (and done that for years with my MP), 
It would be nice if, after pressing split, the vfo's would be on the same
freq and in same mode. This would be a nice short cut.

The purist might add that the CW split would have to be 1 up and the ssb
split 5 up. But that would me too much for me. Let me do that by hand.


73
Arie PA3A



----------------------------
..... A>B is the perfect feature in this application.  If the
menu option made the VFOs equivalent in all VFO parameters (A>B) when it
invoked SPLIT, that might make sense.  In the vast majority of times I go
into SPLIT, I want to tap A>B first to be sure the VFOs are totally equal
before tuning VFO-B up into the pile-up.  I find it helpful for the VFO-B
frequency to start from a known point, i.e., the DX TX frequency, before I
start tuning the pileup.

Ed - W0YK