[Elecraft] [K3] RE: LP-PAN & EMU-0202 and MixW digi software on my K3

[W2XB]

Hello Craig,

Just tested my setup and its working fb, so can give you my settings. Only
difference is that I have a "navigator interface in between the LP-Pan and
the EMU-202. But with the right settings you should be good. 



First you have to setup your K3 for digital. Press the mode key on the right
to get " TX  Data "  on the right hand side of the screen. Then press the 
AFX" key until "Data A" comes up. Also set the "mic" level to about 25 for a
starter. That should do for the K3 settings. If the K3 isn't set for the
digital it won't work(software).

 Now now I have to jar my memory for this part. But lets leave this for last
...

Open up Mixw. And click on "configure." In  "trcvr/Cat/Ptt" set the "cat and
model" to K3/k2. Then click on  the "details " button and set the "port and
Buad rate"(baud rate is same as K3 baud rate. Rest is Data bits 8, parity
none, stop bits 2, and "always off" on both. Close that screen.

 Nest go to "secondary push to talk port" Go to Port settings. "port number"
Data bits *, parity none, stop bits 2, rts-ptt, dtr- always off.close
secondary port. To find the port numbers and assignments go to "device
manager" and open comports. 

 Now go to the "sound device settings. In the first box set to
internal/external sound card.

In the "input and output" boxes set it to the emu 202 card for "mic and
speaker emu 202.

Close the box. 

You should be pretty close now. When you open mixw make sure that the mode
is set to "psk" or "rtty". Also check that the k3 is showing "TX data" on
the right hand side of the screen and that "afx" is set to "data a".

Now if it doesn't work or xmit, I would take two I/8 audio cables and
connect them to the in and out audio connections on the K3 and sound card on
the PC. But if you see the "emu-202 on the first setup you should be good. 

 When the k3 starts to xmit, you will see 4 bars over the "alc" on the
screen. If there are more set it with the mic button to see "4 bars".



 I hope I have it all. But if I don't we have the week-end to get it squared
away.



Don....w2xb 

















From: Craig WØLV (via Nabble)







Date: 10/16/09 19:54:56

To: W2XB

Subject: RE: LP-PAN & EMU-0202 and MixW digi software on my K3

 

Don, 

 

Yes I do….  Please let me know what I can do.  The best time for me
would be Sunday afternoon after noon Colorado time.  Also please let me
know what cables I need so I can get them tomorrow.

 

73's 

 

Craig Turner WØLV

PO Box 75774

Colorado Springs, COÂ  80970

 

719-473-6398

 

 

 

From: W2XB (via Nabble) [mailto:[hidden email]] 

Sent: Friday, October 16, 2009 2:16 PM

To: Craig WØLV

Subject: Re: LP-PAN & EMU-0202 and MixW digi software on my K3

 

Hello Criag, 

I am using the LP-Pan and k3 with mix for all modes.do you still need help
setting up? if so let me know and will work with you over the weekend. 



Don...w2xb 





Craig WØLV wrote:

I have all of the above.  Is there any way I can use the LP-Pan and sound
card to run with MixW for digi modes on my K3.  I have no idea how to
configure.  Any help would be VERY much appreciated. 



Thank all of you in advance!!!!!! 



Craig WØLV 

 







View message @ http://n2.nabble
com/LP-PAN-EMU-0202-and-MixW-digi-software-on-my-K3-tp3833357p3837950.html 

To unsubscribe from LP-PAN & EMU-0202 and MixW digi software on my K3, click
here. 

 











View message @ http://n2.nabble
com/LP-PAN-EMU-0202-and-MixW-digi-software-on-my-K3-tp3833357p3839064.html 

To unsubscribe from Re: LP-PAN & EMU-0202 and MixW digi software on my K3,
click here. 





 
 
 
-- 
View this message in context: http://n2.nabble.com/LP-PAN-EMU-0202-and-MixW-digi-software-on-my-K3-tp3833357p3839376.html
Sent from the [K3] mailing list archive at Nabble.com.