[Elecraft] K3 Line Out in Data Mode?

[Jim Harris]

Dave,

Thanks for the suggestion.  I'm using a level of "8" ---the manual recommends no more than 10.  In sideband I get a good level to the programs I mentioned.  In data modes there is absolutely nothing showing on the programs displays.  It's like there is absolutely no output from the Line Out on the K3.

Have a good day and 73.

Jim, W0EM




Date: Fri, 16 Oct 2009 11:19:16 +0800
Subject: Re: [Elecraft] K3 Line Out in Data Mode?
From: lowband at gmail.com
To: w0em at q.com
CC: elecraft at mailman.qth.net

check your line out setting, maybe you set too low...


73 de ba4rf/Dave

On Fri, Oct 16, 2009 at 10:40 AM, Jim Harris <w0em at q.com> wrote:



Hi,



I've been able to transmit and receive PSK and RTTY in USB & LSB on my new K3.  That includes sound out of the Line Out on the rear panel to my computer's sound card.  However, in all data modes there is no sound from Line Out to the computer.  I've used MMTTY, MMVARI and Hamscope with the same results.  I've read everything related in the operators manual without finding anything that will help.




Looking for working ideas.



Thanks, have a good day and 73.



Jim, W0EM







______________________________________________________________

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft at mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html