[Elecraft] DSP red light coming on at max load

[David M. Elliott]

Interesting.

What exactly is a DSP red LED?
3.41

73 de W6BK


under these conditions, I get no red LED and no apparent problems.


On Oct 14, 2009, at 6:16 PM, Wayne Burdick wrote:

> It's official: we're running out of DSP cycles not just during NR on/
> off but also under worst-case load.
>
> I get a continuous DSP red LED and distorted audio (with a buzz) under
> the following conditions:
>
>   CW
>   CWT on
>   NR on, set to F1-x
>   DSP NB on, any setting
>   FIR IF filter (WIDTH > 500 Hz)
>
> Turning off any of these kills the red LED.
>
> I also get a red LED when turning NR on/off even if the DSP is not
> turned on.
>
> So I need a workaround until you get back. One thing I could do is
> defeat the CW decoder (and CWT) if WIDTH is set > 500 Hz. Other ideas?
>
> tnx
> W
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html