[Elecraft] What have I dont now.

[The Smiths]

Sounds to me like you held the button in too long, and you're in Diversity mode now.. Is the decimal point blinking? if so, turn off the sub, then turn it back on again.  That should do the trick.  

Also, it seems that in the "BSET" mode, the B VFO is still not locked to the A VFO when in diversity mode.  Just a note for Wayne to look into that when he gets a chance.


 
> Date: Sun, 11 Oct 2009 21:00:34 -0400
> From: aj9c at indy.rr.com
> To: k3support at elecraft.com; Elecraft_K3 at yahoogroups.com; elecraft at mailman.qth.net
> Subject: [Elecraft] What have I dont now.
> 
> I have a K-3 with sub rx installed and it was working ok up until 
> today. Now it seems there is no vfo control on the sub. when the main 
> vfo knob is moved the freq changes and acts normal. when sub is pushed 
> the sub rx is listening to the same freq as the main except the display 
> reads a different freq.. Each volume control works but controls a 
> different ear.
> 
> What I have I done that I cant listen to two separate freq, one in each 
> ear. They are not linked.
> 
> Help!
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
 		 	   		  
_________________________________________________________________
Hotmail: Powerful Free email with security by Microsoft.
http://clk.atdmt.com/GBL/go/171222986/direct/01/