[Elecraft] NR and PF1 key noise

[Rob May]

I have mine set up exactly the same way and I can't reproduce your problem in any mode or at any setting of NR.  F/W 3.41, s/n 1417.
Rob


> Date: Fri, 9 Oct 2009 22:58:05 -0400
> From: mcamp at gmavt.net
> To: elecraft at mailman.qth.net; support at elecraft.com
> Subject: [Elecraft] NR and PF1 key noise
> 
> Here's another bug that now occurs with v 3.41 and I didn't notice this 
> before updating.
> I assigned the programmable function button "PF1" to switch the 
> configuration menu item "SPKR+PH", now if I have NR on and I try to 
> switch the external speaker on and off by holding the "PF1" button I get 
> a tone that is medium low loudness around .7-1 KHZ.
> On some NR settings like "1-1 to 2-4" the tone occurs anytime I switch 
> the speaker on or off and "3-1" and above it only seems to occur when 
> switching the speaker on.
> This doesn't happen when I switch the speaker from the config menu only 
> when switching using the "PF1" button.
> Pushing other buttons makes it stop.
> Almost sounds related to the "3.41 incomplete fix" thread.
> Not a big deal but needs to be fixed.
> Bob
> KB1FRW
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/