[Elecraft] S-meter calibration

[Bill K9YEQ]

Thank you, Wayne.  I just switched back. I will rerun the calibration
tomorrow based on your advice. I had done so earlier without reading this
and I did not follow the recommended process exactly as I had ordered my
unit factory assembled.

73,

Bill
K9YEQ
K2 #35; KX1 #35; K3 #1744; mini mods
ATS-3B
-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Wayne Burdick
Sent: Wednesday, October 07, 2009 9:28 PM
To: Wayne Burdick
Cc: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] S-meter calibration

Typo. I meant to say SMTR NOR in the paragraph below.

Wayne

Wayne Burdick wrote:

> We're going to add a final instruction to K3 Utility explaining that
> SMTR OF and SC must be adjusted after running RF GAIN calibration. I
> suggest doing this with SMTR MD = ABS, preamp ON. Under these
> conditions you should be able to set SMTR OF and SC such that 50 uV
> produces an S9 reading, and 1 uV results in S2 to S3.....

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html