[Elecraft] ATU TUNE does not work in DATA A Split mode

[Rob May]

I can confirm this behavior.  In Data A mode split, no (or very, very little) rf out.  Exit split mode and get ~5w during tune.  Also, when the TUNE (not atu tune) button is pressed, the display which normally shows swr displays "--" and power reads "0.0".  When you hit the tune button again to exit "ERR TXG" is displayed.  FW 3.41.
Rob
NV5E

> Date: Wed, 7 Oct 2009 18:30:06 -0700
> From: AE4CW at att.net
> To: elecraft at mailman.qth.net
> Subject: [Elecraft]  ATU TUNE does not work in DATA A Split mode
> 
> 
> Has anyone noticed that ATU TUNE does not work (properly) when in DATA A
> Split mode?  The relays clatter for about three seconds but no RF is
> produced and no SWR reading is resolved.  If I drop Split, ATU TUNE works
> fine.  I'd appreciate if someone else could verify if their K3 is behaving
> the same way.  FW is 03.41.  Thanks.
> 
> P.S. ATU TUNE Split mode works FB in AFSK A and FSK D.  Split is N/A in PSK
> D.
> 
> Chuck, AE4CW
> -- 
> View this message in context: http://n2.nabble.com/ATU-TUNE-does-not-work-in-DATA-A-Split-mode-tp3785489p3785489.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
 		 	   		  
_________________________________________________________________
Hotmail: Powerful Free email with security by Microsoft.
http://clk.atdmt.com/GBL/go/171222986/direct/01/