[Elecraft] Shift Control Problem

[Don Wilhelm]

Earl,

There is a Mark/Shift and Pitch Selection - See the manual page 31.
Set to your data mode (I assume AFSK or FSK-D), then hold the PITCH 
button - rotate the VFO A knob to tell the K3 what mark frequency and 
shift that you are using.  If you are using a computer application, the 
mark frequency and the shift must match in both the K3 and the application.

73,
Don W3FPR

Earl wrote:
> I just received my K3 S/N 3223 (FW 3.30/DSP 2.26) back from Aptos and 
> I now seem to have a problem with the Shift FC not correct for 
> DATA/FSK-D mode. Crystal Filters:2.7-5Pole, 1.8-8 Pole and 250-8 pole.
>
> The center star is at *1.36 and it needs to be at *2.21.
> When I narrow the BW the signal disappears, but I can get it back by 
> manually moving the Shift Control to 2.20.
>
> I have compared all my CONFIG and MAIN settings with a local with a K3 
> and they pretty well match up.
>
> Any ideas??
>
> Earl N5ZM..
>
>   
>