[Elecraft] xmit problem?

[Hector Padron]

I guess I am fortunate not to have never a problem with the TX output power,always I have seen 110 W on CW and 110W PEP on SSB on all bands,my wattmeters are BIRD and the one inside the PalStar tuner which both agree in same reading,I adjusted the power calibration trough the Utilities and it showed 5.1 and 50W always,mine is serial 2192.
In 10 months of use,only problem I have had is the volumen and rf gain plastic knobs were broken twice and Elecraft replaced then quick,other than that my K3 never fails and I use it daily on CW and SSB,sometimes also on digital modes.
 
AD4C
 
 
"For a refined ham it is compulsory to own a k3"

--- On Sat, 10/3/09, Julian, G4ILO <julian.g4ilo at gmail.com> wrote:


From: Julian, G4ILO <julian.g4ilo at gmail.com>
Subject: Re: [Elecraft] xmit problem?
To: elecraft at mailman.qth.net
Date: Saturday, October 3, 2009, 9:24 AM




Mike Kasrich wrote:
> 
> I have K-3 2746.  Running the current firmware 3.41 etc. I have not seen 
> 100w output from this radio ever.  I hooked up my cantenna and ran the 
> tx gain through the k-3 utility and get the following numbers for tx 
> gain along with the corresponding power output ...
> 
> 

How are you measuring the power output?

-----
Julian, G4ILO. K2 #392  K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html

-- 
View this message in context: http://n2.nabble.com/xmit-problem-tp3758478p3759657.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html