[Elecraft] K3 command mode default k30 k31

[Don Wilhelm]

Hugo,

That sounds like a programing deficiency in the Microham MK2.  The fact 
that the K3 defaults to K30 on power on is documented in the 
Programmer's Reference as default.
If a device needs to use an extended mode command, it should query the 
state - the K3 command can be used as a GET or a SET, so the programmer 
can determine the state before issuing the command.

73,
Don W3FPR

Hugo pa4la wrote:
> I am playing with my Microham MK2 and have learned that,
>
>  the K3 must be in extended (k31) command mode for the MK2 to switch correct
> between audio or fsk data modes
>
>  
>
> When the K3 is powered on, the mode setting is always standard k30.
>
> Putting the k31 command via a terminal is not a big issue but it would save
> a couple of mouse clicks :)
>
>  
>
> Is there a way tot save the k31 setting or a way to make k31 the default
> setting?
>
>  
>
> Tnx in advance,
>
>  
>
> Hugo pa4la
>   
>