[Elecraft] [K3] Minor XIT/RIT display glitch with band change by RS232

[Carl Clawson]

This happens using N1MM logger V9.10.3 and K3 V3.6.3. I don't have any
serial snooper tools handy so I can't give the exact RS232 command sequence,
but it appears as if N1MM tries to turn off RIT/XIT on band change. To
reproduce:

Go to a band and turn RIT or XIT on. You'll see the annunciator on the LCD,
and one of the three LEDs by the knob will be lit. Now using the software
change to an adjacent band with ctrl-PgUp/PgDn and change back. The
annunciator will be off but the LED will still be lit. I think XIT/RIT is
actually off but I haven't checked to be sure. Whatever the software is
sending, this is not a correct response by the K3.

73 and thanks for listening
Carl WS7L
K3 #486, which pleased me _exceedingly_ during CQWW this past weekend!