[Elecraft] [MM] W2 connection problem - NZ0T Comment

[NZ0T]

Hi Dan,

I am using this emulator program:

http://eterlogic.com/Products.VSPE.html

I use it to run two seperate programs from one port.  The program allows me to create a seperate virtual port.  I am using actual port 5 and I have created a virtual port 9 which can share applications.  The connection to the W2 is a Dynex DX-UBDB9 USB/serial adapter thru the Elecraft supplied serial cable directly to the W2 serial connection.

Hope this helps.

73 Bill nz0t
  ----- Original Message ----- 
  From: Dan in Florida [via Elecraft] 
  To: NZ0T 
  Sent: Tuesday, November 24, 2009 3:32 PM
  Subject: Re: W2 connection problem - NZ0T Comment


  Bill, 

  Will you clarify something for me? 

  You mentioned a terminal emulator.  If I understand you correctly, with this 
  emulator, you can run two separate applications (a logging program and the 
  K3 utility) at the same time.  ...and that both of these applications are 
  accessing and controlling the K3 at the same time via it's serial port.  Is 
  this correct? 

  My second question concerns the W2.  How is the computer connection made to 
  the W2?  Is it not made directly to the W2?  What cable goes where? 

  Thanks, 
  Dan - W4TQ 

  ______________________________________________________________ 
  Elecraft mailing list 
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:[hidden email] 

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html



------------------------------------------------------------------------------

  View message @ http://n2.nabble.com/W2-connection-problem-tp4060656p4061360.html 
  To unsubscribe from W2 connection problem, click here. 


-- 
View this message in context: http://n2.nabble.com/W2-connection-problem-tp4060656p4061434.html
Sent from the [MM] mailing list archive at Nabble.com.