[Elecraft] Mode memory by band

[Greg - AB7R]

Im not sure but If I understand the problem correctly when using MM to change to another 
band that would have a diff sideband the sequence being executed is:

Start on 20M
Click on the 40M button in MM
sets mode to LSB
sets freq to 7.xxx

I think this is setting the mode on 20M to LSB.  So when you return to 20M it is not on 
USB.

As Joe Subich pointed out, if the sequence were changed to:

Click on 40M button in MM
sets freq to 7.xxx
set mode to LSB

this would not effect the mode on the band you are leaving, only the band you are changing 
to.

I have not evaluated this to see the results of the current setup, but there have been a 
couple reports so I suspect the problem is real and should be corrected.


-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Tue Nov 24  9:58 , Lyle Johnson  sent:

>> -- how can we change from LSB to USB when it's wrong?
>
>Hold Alt under the MODE switch to toggle between: USB and LSB; CW and CW 
>REV; AM and Synchronous AM; etc.
>
>73,
>
>Lyle KK7P
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: Elecraft at mailman.qth.net','','','')">Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html