[Elecraft] K3 & ALS 600
Joe Subich, W4TV
lists at subich.com
Tue Nov 24 12:14:45 EST 2009
> It only takes about 40 watts of drive from the K3 to get 400
> plus out of the ALS-600.
If you choose not to connect the ALC line you need a way to
absolutely prevent the K3 from providing more than approximately
50 Watts of drive. Excess drive will damage the transistors
in the amplifier. You will also be generating a very dirty
signal until the transistors die.
73,
... Joe, W4TV
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dyarnes
> Sent: Tuesday, November 24, 2009 11:33 AM
> To: Bob Wehking; Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 & ALS 600
>
>
> You can hook up the ALC if you want, but don't need to. Just
> connect the
> amp to the keying line on the K3, and the antenna, and you
> are good to go.
> It only takes about 40 watts of drive from the K3 to get 400
> plus out of the
> ALS-600.
>
> Dave W7AQK
>
>
> ----- Original Message -----
> From: "Bob Wehking" <rwehking at cinci.rr.com>
> To: <Elecraft at mailman.qth.net>
> Sent: Tuesday, November 24, 2009 8:50 AM
> Subject: [Elecraft] K3 & ALS 600
>
>
> >I have a K3, S/N 225 & an ALS 600, S/N 12911 that I would like to
> >interface. Do I need to connect the ALC to the amp. Anything else
> >needed to get the two to play together?
> >
> > Bob
> > WB8DDI
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list