[Elecraft] K3 in SS SSB

[Greg]

Maybe I misunderstood what he was trying to do.  I thought he was trying to 
NOT use RIT, rather put the radio into split on a run frequency, lock VFO B 
for TX and use VFO A to tune around your run freq instead of using the small 
RIT knob.  So RC; would not apply.

----- Original Message ----- 
From: "Iain MacDonnell - N6ML" <ar at dseven.org>
To: "Greg" <ab7r at cablespeed.com>
Cc: "K5WA" <K5WA at comcast.net>; <elecraft at mailman.qth.net>; <ab2tc at arrl.net>
Sent: Monday, November 23, 2009 8:02 PM
Subject: Re: [Elecraft] K3 in SS SSB


On Mon, Nov 23, 2009 at 5:27 PM, Greg <ab7r at cablespeed.com> wrote:
> Bob,
>
> Instead of {CLEARRIT} try {CAT1ASC K31;MN098;}
>
> I have not tried it yet but that should execute the VFO B>A which should
> have the same effect as CLEARRIT.

Uhm... no? All that will do is bring up the "VFO B>A" menu entry...
and it's even it you actuated it, all it would do is to copy VFO B's
frequency to VFO A - and RIT would still be on, and you would have
QSYed to whatever frequency VFO B happened to be on.

I believe a more suitable command would be  {CAT1ASC K31;RC;}

The "K31;" is probably unnecessary, but it shouldn't hurt.

    ~Iain / N6ML


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of K5WA
> Sent: Monday, November 23, 2009 4:57 PM
> To: elecraft at mailman.qth.net
> Cc: ab2tc at arrl.net
> Subject: Re: [Elecraft] K3 in SS SSB
>
>
> Knut,
>
>
>
> That won't work because it doesn't allow N1MM's {CLEARRIT} feature to 
> resent
> the RX back to zero as each contact gets logged. Some guys actually call 
> on
> frequency too! ;-) I may look at using an Elecraft MACRO and a call from
> N1MM to accomplish the same thing with bigger knobs though. If there is a
> way to tell VFO A to reset to VFO B's frequency without changing any
> filters/etc., it might work.
>
>
>
> Bob K5WA
>
>
>
>
>
> SNIP >>>>>>>>>>>>>>>>>>>>
>
> If you are running a frequency, why don't to put the rig in split mode and
>
> lock the B VFO instead of using the RIT?
>
>
>
> AB2TC Knut
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.425 / Virus Database: 270.14.79/2522 - Release Date: 11/23/09 
19:45:00