[Elecraft] KUSB Adaptor

[juergen piezo]

Its pointless discussing hardware design changes for  the K3, the K3's design is carved in rock. It would probably be a good design  consideration for the K4, or K5. We are unlikely to  see different models of Elecraft products roll out like the Japanese roll out new radio models. I just noticed that Yaesu has a new radio called the  FT5000, it looks like a FT2000 and it probably has the same crap receiver. Its ergonomics look good though.

John






--- On Sat, 11/21/09, Ross Primrose <n4rp at aiko.com> wrote:

> From: Ross Primrose <n4rp at aiko.com>
> Subject: Re: [Elecraft] KUSB Adaptor
> To: 
> Cc: elecraft at mailman.qth.net
> Date: Saturday, November 21, 2009, 1:07 PM
> David Fleming wrote:
> > But, like Julian said, is there any advantage to using
> a plain USB cable instead a USB cable with a bulge on the
> end? :-)
> >
> >   
> There could be, if Elecraft supported it. USB 2.0 has
> enough bandwidth 
> to support a software band scope...
> 
> 73, Ross N4RP
> 
> -- 
> FCC Section 97.313(a) “At all times, an amateur station
> must use the minimum transmitter power necessary to carry
> out the desired communications.”
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>