[Elecraft] My Proposed K3 Configuration so far...

[John W. Sloane, DMD]

Hello, everybody,

I have a K2 kit, totally built by myself, with all K2 options, totally built
and installed by myself, 6-Meter Transverter kit, totally built by myself, a
K3 kit, totally built by myself with all options that are available at this
time, built and installed by myself and I built every ONE of the mini
modules, and I own three KUSBs.  This email is not intended to brag about
me, but it IS intended to offer some perspective on just how much quality
and reliability you are getting when you buy Elecraft. The only "problems" I
EVER had with any of Elecraft's fine products were simply how to make
roofing crystal choices, and perhaps to ask for technical assistance from
time to time, and I always got an immediate, friendly and CORRECT answer. I
also own radios made by other top-rated companies, which are, indeed very
nice, but cannot come close to the comparable Elecraft products.  Elecraft's
products are TOP quality, TOP performing products and so are their people,
from start-to-finish.  No I do not own stock in the company, but when one
keeps going back time after time, and has compared the products personally
to competitive products, it does speak of some experience.
IN SHORT:
NEVER be afraid to buy ANYTHING offered by Elecraft, because you are getting
THE BEST FOR LESS.

John-KJ4PIL

And by the way, the three KUSBs all work perfectly, just like the radios,
when used as directed.

-----Original Message-----
From: Ken Wagner K3IU [mailto:kenk3iu at cox.net] 
Sent: Friday, November 20, 2009 8:38 AM
To: Lionel Lhermitte
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] My Proposed K3 Configuration so far...

Hi Lionel:

There are hundreds, if not thousands, of the KUSB option in use. They do 
work. If you get one and it, in fact, doesn't work, then I'm sure that 
Elecraft will allow you to return it. I have successfully used one on 
two different machines with three different operating systems and, with 
the correct driver installed, it works!

73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lionel Lhermitte wrote:
> Hi all,
> Few minutes ago, I just ordered a full K3 kit ....with "KUSB"
option.....so
> not very happy to hear that !
> Regards,
> Lionel, F6FCD, France
>
> -----Message d'origine-----
> De : elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] De la part de robby robertson
> Envoyé : vendredi 20 novembre 2009 13:39
> À : elecraft at mailman.qth.net
> Objet : [Elecraft] My Proposed K3 Configuration so far...
>
>
> Phil
>
>  
>
> The KUSB is just a USB to RS-232.  They nailed me for $40 for one because
I
> thought it was a special one for the K3. It didn't work. I later found one
> for under $10 that works fine. Don't buy it.
>
>  
>
> Elecraft have some wonderful products and accessories.  The KUSB just
isn't
> one of them.
>
>  
>
> -Robby
>
> VY2SS
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>