[Elecraft] Band data outpurs

[Larry - K2GN]

I'm using N0SS's cable on my K3/Quadra.   Works like a dream.
Made one mod and was to bring out the lines needed to drive an FSK 
operation.
Basically, made a "Y" connector for the accessory port.
de K2GN/Larry
K3 - S/N 3278
----- Original Message ----- 
From: "Joe Subich, W4TV" <lists at subich.com>
To: "'w0uo'" <w0uo at citbroadband.com>; <elecraft at mailman.qth.net>
Sent: Tuesday, November 17, 2009 6:36 PM
Subject: Re: [Elecraft] Band data outpurs


>
> Yes.  Please see N0SS's excellent documentation on connecting
> the K3 to a Quadra amplifier.  The cable shown on that page
> (http://www.n0ss.net/k3-to-quadra_12jul09.pdf) will give you
> all of the corresponding pins between the K3 ACC jack and the
> Yaesu (DIN8/262) "Band Data" jack.
>
> 73,
>
>   ... Joe, W4TV
>
>
>
>
>
>
>> -----Original Message-----
>> From: elecraft-bounces at mailman.qth.net
>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of w0uo
>> Sent: Tuesday, November 17, 2009 12:15 PM
>> To: elecraft at mailman.qth.net
>> Subject: [Elecraft] Band data outpurs
>>
>>
>> Can anyone tell me if the K-3 band data outputs are the same
>> as Yaesu? If so, what are the pin equivalents?  I would like
>> to use my K3 with an Array Solutions band decoder (an older style.
>>
>>
>>
>> Jim
>>
>> W0UO
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html