[Elecraft] T1: resistance check problems before final assembly

[John Shadle]

On p. 22 of the T1 assembly manual it states that "resistance between D3 
anode and the "-" pad near D7" should be >100Kohms. That's good.

However, it then states that when I press S1 I should see resistance 
between 117k and 130k ohms. I have 148k ohms.

Is this a problem? If so, what should I check? I've tried switching the 
leads of my multimeter, but that doesn't appear to affect anything.

Thanks for your help.
-john W4PAH