[Elecraft] K3 Firmware Req for SWL band and Using Memories

[westalto at comcast.net]

Frankly I see no problem with the way it is currently 

implemented. I find a really simple way to get back into 

the desired band "segment" is to make sure that the B 

vfo is set to an appropriate frequency and do an A - B 

swap. 



73, 

Doug W6JD 



BTW, as an old software engineer I can imagine the 

can of worms that implementing a "GEN" set of 

registers would be! 


----- Original Message ----- 
From: "Wayne Burdick" <n6kr at elecraft.com> 
To: "Steve Ellington" <n4lq at carolina.rr.com> 
Cc: "Elecraft Reflector" <elecraft at mailman.qth.net> 
Sent: Sunday, November 15, 2009 6:39:26 PM GMT -08:00 US/Canada Pacific 
Subject: Re: [Elecraft] K3 Firmware Req for SWL band and Using Memories 

Hi Steve, 

I'd like to do something along these lines. It's a nontrivial change   
to the firmware, but I've added it to the list. 

tnx 
Wayne 
N6KR 

On Nov 15, 2009, at 5:10 PM, Steve Ellington wrote: 

> Memories are too complicated and too much trouble.... 
> My alternate suggestion was to allow the use of any particular band   
> for this 
> purpose, such as 60 meters or some other band that you never use. 

______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html