[Elecraft] K3 Sub Receiver forces FSK D to AFSK A

[Joe Subich, W4TV]

I've noticed the same sub-mode change in data modes but had 
not tracked it down to the subreceiver (I thought I had a 
bad macro in my logging software).  However, now that Bud 
has posted this, I can confirm the (bad) behavior as due to 
turning on the subreceiver - even if I have tapped A -> B 
twice to set all parameters on both VFOs the same. .  

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bud 
> Governale, W3LL
> Sent: Thursday, November 12, 2009 4:53 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 Sub Receiver forces FSK D to AFSK A
> 
> 
> I've always used FSK D mode.
> 
> Since updating to 3.57 when I turn on the Sub Receiver the 
> radio goes into AFSK A. 
> 
> How do I stop the SUB from changing FSK D to AFSK A?
> 
> In the past the radio was always in FSK D and the SUB did not 
> change this.
> 
> I'm in VFO A and check DATA MD. It says FSK D.
> 
> Turn on SUB and check DATA MD it now says AFSK A.
> 
> Thanks,
> 
> Bud W3LL
> w3ll at arrl.net
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html