[Elecraft] K3 Synchronous AM Detection - clicking on SHIFT & Width ?

[Dave Van Wallaghen]

Hi Bill,

Yes, I've noticed that also. But, I've always had some clicks when 
adjusting filter widths and shifting for the last half dozen or so 
firmware upgrades. I have serial #338 here. Not sure if that makes a 
difference or not.

As a side note: Thanks Wayne for a very nice feature. A side effect I 
found right off is that is you are a LP-Pan/Power SDR user, you can 
click on AM stations with the accuracy of throwing a grenade and the K3 
will lock in for you without manually getting closer on the tuning dial ;-)

73,
Dave W8FGU


Bill wrote:
> Interesting to hear & watch the Sync mode zero in on AM stations as they 
> 'pass it around'  !!
> 
> Anybody else hearing a clicking noise while turning the SHIFT or WIDTH 
> controls?
> 
> 73, Bill   N2BC     (K3/00929)
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>