[Elecraft] SSB+CW better understood, but answer is a bummer

[Lance Collister, W7GJ]

Howdy Bill,

My setup and usage is the same as yours.  I wrote a little macro (one button push) 
that will put the K3 into split mode operation and move the CW REV frequency up a kHz 
so the SSB station can copy your CW.  If you are interested, I can send it to you 
again. GL and VY 73, Lance


  Bill Davis Jr wrote:
> Thanks guys .... I'm sure NOT Being in VOX is the problem ...... RATS ... I use a
> sequencer to activate the K3 PTT and DO NOT use VOX. It is a feature
> that I was counting on to simplify things too. Almost all of my K3
> applications are VHF/UHF and microwave where CW on USB is STANDARD, CW
> reverse is close but I still have to retune when I change from
> USB to CW. I didn't want to be forced to retune the frequency.
> 
> 
> 
> Thanks again for all assistance
> 
> 
> 
> 73 and good DX
> 
> 
> 
> Bill   K0AWU  (54yrs on the air - Weak signal VHF/UHF and Microwave activity) 		 	   		  
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 


-- 
Lance Collister, W7GJ (ex: WN3GPL, WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX)
P.O. Box 73
Frenchtown, MT  59834  USA
QTH: DN27UB
TEL: (406) 626-5728
URL: http://www.bigskyspaces.com/w7gj
2m DXCC #11/6m DXCC #815

Interested in 6m EME?  Ask me about subscribing to the MAGIC BAND EME email reflector!