[Elecraft] M1-M4 Quick memories

[Larry K1UO]

Hi Julian.....MEM 0-9 is set to Band Sel      


I still go to the bands when I push M>V and the keys 1-9 to go to the programmed bands and M1 or M2 does set the saved parameters for those bands either cw or ssb....BUT...I can no longer add or make changes to the parameters stored in M1 or M2 by pressing V>M and the appropriate memory key.  I go straight to the selectable memory bank instead.

Hope thats clear?

73
Larry K1UO
  ----- Original Message ----- 
  From: Julian, G4ILO [via Elecraft] 
  To: Larry K1UO 
  Sent: Sunday, November 01, 2009 7:52 AM
  Subject: Re: [Elecraft] M1-M4 Quick memories




    Larry K1UO wrote:
    Let me try and clarify.  When I wanted to save some parameter setup on a particular band, I used V>M to save the info in the M1 or M2 keys for a quick update of band information.  Now when I use 
    that function all I get is memory position 00 displayed.  Nothing I do gets me back to the M1-M4  and I can no longer save my changes to each band so when I press, for example, M>V then 1 it loads the 160M setup info from the M1 or M2 keys. 
  Is the configuration option MEM 0-9 set to "nor" or "band sel"?
  Julian, G4ILO. K2 #392  K3 #222. 
  * G4ILO's Shack - http://www.g4ilo.com
  * KComm - http://www.g4ilo.com/kcomm.html
  * KTune - http://www.g4ilo.com/ktune.html




------------------------------------------------------------------------------

  View message @ http://n2.nabble.com/M1-M4-Quick-memories-tp3925899p3926863.html 
  To unsubscribe from Re: M1-M4 Quick memories, click here. 


-- 
View this message in context: http://n2.nabble.com/M1-M4-Quick-memories-tp3925899p3926972.html
Sent from the Elecraft mailing list archive at Nabble.com.