[Elecraft] RES: RES: UPGRADE VERSION 3.11

[py5eg]

Hi Don
Thanks for the tip
I will do that
Atilano PY5EG

________________________________

De: Don Wilhelm [mailto:w3fpr at embarqmail.com]
Enviada: qua 27/5/2009 20:16
Para: py5eg
Cc: elecraft at mailman.qth.net
Assunto: Re: [Elecraft] RES: UPGRADE VERSION 3.11



Atilano,

Your K3 *is* powered on, and with the TX light blinking *and* with the
MCU LD on the LCD, it is waiting for a firmware load.

Follow the steps in the K3 Utility Help menu - "Troubleshooting" -
"Force K3 into Firmware Load Required" to be certain the K3 is ready for
the *beginning* of a firmware load.

If you do not have the latest version of K3 Utility, that may be part of
your problem.  Download the latest version from the Elecraft website.

73,
Don W3FPR

py5eg wrote:
> Hi Don
> Thanks for your help
> I already download the firmware. I try to run the K3 utility but there is no access to the upgrade transfer.
> The problem now is that the K3 does not turn on again.
> When I switch on the LCD has no light and only the message  "MCU LD" and also the TX led blinks
> 
> What can I do?
> Thanks in advance
> 
> Regards
> Atilano
>
> ________________________________
>
> De: Don Wilhelm [mailto:w3fpr at embarqmail.com]
> Enviada: qua 27/5/2009 18:49
> Para: py5eg
> Cc: elecraft at mailman.qth.net
> Assunto: Re: [Elecraft] UPGRADE VERSION 3.11
>
>
>
> Atilano,
>
> The K3 is waiting for a firmware load - MCU LD plus a blinking TX
> indicator is how that condition is displayed.
>
> I suggest you download the firmware again to assure that you do not have
> a corrupt firmware file on your computer, then run K3 Utility again to
> load the firmware.  Load all the firmware, including the data tables.
>
> 73,
> Don W3FPR
>
> py5eg wrote:
>  
>> Hi Folks:
>>
>> During a upgrade procedure of one of my K3 to version 3.11 a malfunction has occurred
>>
>> 1) A message asking to turn the K3 of and on again to continue the upgrade
>> 2) I tried to turn of and didn´t succeed
>> 3) I turned the power supply off and turned on again,and turned the K3 on
>> 4) The process crushed and with the display was off  with  "MCU LD"
>> 5) The TX led blinking and no way to turn off
>>
>> What should I do?
>>
>> Atilano
>> 
>>
>>    
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.339 / Virus Database: 270.12.42/2137 - Release Date: 05/27/09 07:50:00
>
>