[Elecraft] RES: UPGRADE VERSION 3.11

[py5eg]

Hi Don
Thanks for your help
I already download the firmware. I try to run the K3 utility but there is no access to the upgrade transfer.
The problem now is that the K3 does not turn on again.
When I switch on the LCD has no light and only the message  "MCU LD" and also the TX led blinks
 
What can I do?
Thanks in advance
 
Regards
Atilano

________________________________

De: Don Wilhelm [mailto:w3fpr at embarqmail.com]
Enviada: qua 27/5/2009 18:49
Para: py5eg
Cc: elecraft at mailman.qth.net
Assunto: Re: [Elecraft] UPGRADE VERSION 3.11



Atilano,

The K3 is waiting for a firmware load - MCU LD plus a blinking TX
indicator is how that condition is displayed.

I suggest you download the firmware again to assure that you do not have
a corrupt firmware file on your computer, then run K3 Utility again to
load the firmware.  Load all the firmware, including the data tables.

73,
Don W3FPR

py5eg wrote:
> Hi Folks:
> 
> During a upgrade procedure of one of my K3 to version 3.11 a malfunction has occurred
> 
> 1) A message asking to turn the K3 of and on again to continue the upgrade
> 2) I tried to turn of and didn´t succeed
> 3) I turned the power supply off and turned on again,and turned the K3 on
> 4) The process crushed and with the display was off  with  "MCU LD"
> 5) The TX led blinking and no way to turn off
> 
> What should I do?
> 
> Atilano
>  
>