[Elecraft] Switching PS with the K3 - thoughts?

[dyarnes]

The Radio Shack 25 amp supply, which someone else mentioned and recommended 
is available on the website, but the local store nearby told me they will 
order it for you (at that sale price--$59), and no shipping cost.  Most 
Radio Shack stores have stopped stocking those power supplies locally.  I 
already had one, and the Samlex 1223 also, and both work pretty well.  By 
the way, I did pull the cover off both, and they are not the same--they just 
looked very similar.  Actually, the Radio Shack supply looks like it might 
be a tad more substantial.  Anyway, for under $60, it's possibly worth a 
look.

Dave W7AQK


----- Original Message ----- 
From: "David Little" <dalite01 at bellsouth.net>
To: "'Fern'" <crc at cyberlink.bc.ca>; "'Ed Steeble'" <esteeble at sc.rr.com>; 
"'K3_Discussion_Group'" <elecraft at mailman.qth.net>; "'k3-groups'" 
<Elecraft_K3 at yahoogroups.com>
Cc: "'Ed K3IXD'" <esteeble at sc.rr.com>
Sent: Monday, May 25, 2009 7:57 AM
Subject: Re: [Elecraft] Switching PS with the K3 - thoughts?


> Another one that may be worth looking into (other than the suggestions
> presented already) is the Alinco DM-330MV Switching supply.
>
> It is metered, adjustable voltage, remotely accessible, small, quiet,
> well laid out, and it has a feature similar to Yaesu's "Clock Shift",
> whereby you can shift any noise it might make to another frequency; on
> the fly.
>
> However, I haven't found any noise from it yet, and the Radio Shack 25
> Amp (I believe is a Samlex model) has made some noise when used in my
> transportable setup : http://www.se-hams.com/html/emcomm1.html
>
> I am in the process of replacing all of my power supplies with this
> Alinco model.
>
> Take a Look:  http://www.alinco.com/Products/DM330MVE/
>
> David
> KD4NUE
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Fern
> Sent: Monday, May 25, 2009 10:33 AM
> To: Ed Steeble; K3_Discussion_Group; k3-groups
> Cc: Ed K3IXD
> Subject: Re: [Elecraft] Switching PS with the K3 - thoughts?
>
>
> Ed:   I would recommend a switching power supply from Samlex either
> their 23 amps unit or better yet their 35 amp metered power supply as
> they are very quiet.
>    Fern
>
>
> ----- Original Message ----- 
> From: "Ed Steeble" <esteeble at sc.rr.com>
> To: "K3_Discussion_Group" <elecraft at mailman.qth.net>; "k3-groups"
> <Elecraft_K3 at yahoogroups.com>
> Cc: "Ed K3IXD" <esteeble at sc.rr.com>
> Sent: Sunday, May 24, 2009 8:43 PM
> Subject: Re: [Elecraft] Switching PS with the K3 - thoughts?
>
>
>> Anyone have experiences with the new MFJ-4235MV power supply? We have
>> been following this discussion because we are always looking for a
> good
>> reliable, lighter weight power supplies for our two K3 that we use on
>> our C6APR DXpeditions.
>>
>> BTW the K3s are excellent for DXpeditions, light weight, reliable, and
>> hear/transmit well. We had tried four other rigs.
>>
>> 73, Ed
>> K3IXD
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html