[Elecraft] [K3] KUSB+Logger32

[Julian, G4ILO]

Mike Harris-9 wrote:
> 
> G'day,
> 
> Tried using my KUSB today.  Loaded latest driver and all communicates well 
> between K3 Utility and K3.  I modified the power on banner OK.
> 
> Changed the com port in Logger32 to the same and after the first read of 
> frequency Logger32 freezes and needs the three finger salute.  CPU seems 
> to be running at 100%
> 
> K3+RS232+Logger32 can be running OK.  Change over to KUSB, change the com 
> port in Logger32 and it freezes.
> 
> KUSB plugged into any USB port on the PC not via a hub.
> 
> Changed the port speed for both K3 and KUSB from 38400 to 9600 no change.
> 
> Anyone else seen this?
> 
> 

Not specifically. However, I believe the KUSB uses the Prolific PL2303
chipset, and I have had problems with other adapters using this chipset
which were not experienced when using a real serial port. I obtained a USB
adapter using an FTDI chipset which a retailer claimed was "more reliable"
than the Prolific chipset and have not so far experienced any problems with
it.

-----
Julian, G4ILO. K2 #392  K3 #222.
http://www.g4ilo.com/ G4ILO's Shack    http://www.g4ilo.com/kcomm.html KComm
for Elecraft K2 and K3   http://www.wota.org.uk/ Wainwrights On The Air 

-- 
View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2966753.html
Sent from the [K3] mailing list archive at Nabble.com.