[Elecraft] KPA-800 & KPA 1500

[Frank Ross W4NHJ]

How about adding a built in tuner in the KPA-800/1500 that would work even 
when you ran 100 watts from the K2 or K3 with the amp in standby?

Frank - W4NHJ

----- Original Message ----- 
From: "Rudy Bakalov" <r_bakalov at yahoo.com>
To: "'Elecraft Reflector'" <elecraft at mailman.qth.net>
Sent: Monday, May 18, 2009 9:06 PM
Subject: Re: [Elecraft] KPA-800 & KPA 1500


>
> This is a great, healthy discussion that can help determine the need for 
> an Elecraft branded amp. If we can't come up with a good set of features 
> that are not met by current products, then perhaps it will be difficult to 
> make the case there should be an Elecraft made amp.
>
> My dream product is a SO2R appliance that does all the RX/TX switching 
> between 2 radios, including bandpass filters and remote antenna selection. 
> 1500 W out, no time limit, RTTY included.  Think of a 1500 W version of 
> SPE, plus built-in W3NQN filters and Array Solution's SixPack.  2 inputs, 
> 2 CATs, 2 PTTs, 6 or 10 remotely controlled outputs.
>
> Currently, there is not product that comes even close to such feature set.
>
> Rudy N2WQ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html