[Elecraft] [K3] RIT encoder has become flaky

[Bill W5WVO]

Further clarification: Happens on both RIT and XIT. Not related to a specific 
frequency or band. Happens going in both directions. Sorry I omitted these 
details. All of this points to a hardware problem (shaft encoder), but if anyone 
else has had this issue and fixed it by some other means, please let me know. 
Thanks.

Bill W5WVO


SidShusterman wrote:
> Bill, which model radio do you have? Does the XIT behave the same
> way? I know the RIT/XIT should be the same for all bands. Does it
> happen both + and - ? Does it happen at 0.85, 1.85 an 2.85?  This
> might make it easier to diagnose. I have had my K3 since January of
> this year and I don't see this.
> Good Luck,
> Sid
>
> Bill W5WVO wrote:
>> As an example -- while slowly turning the RIT knob, the frequency
>> display will go through: .82
>> .83
>> .84
>> .85
>> .84*
>> .85*
>> .84*
>> .84*
>> .83*
>> .84*
>> .85*
>> .86
>> .87
>> ....etc.
>>
>> The erroneous readouts are starred.
>>
>> This is repeatable, though not necessarily with the same numbers.
>> This would seem to be an encoder problem. Has anyone else
>> experienced this?  Bill W5WVO
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html