[Elecraft] Amp choices for QRP K3?

[K2ZR]

Is anyone using the ALS-600 with their K2/QRP?
Dick, K2ZR
PS: Phil ( AS5X ) TU for the information on the ALS-600 and your K3

Dick Stein wrote:

> Is anyone using the ALS-600 with their K2/QRP?
> Dick, K2ZR
> PS: Phil ( AS5X ) TU for the information on the ALS-600 and your K3
>
> Phil & Debbie Salas wrote:
>
>> I just checked - my ALS-600 runs 80-100 watts out with 10 watts drive 
>> from my K3, though I normally run it at more like 500 watts output 
>> with about 70 watts drive.  There is a 35 ohm resistor in series with 
>> the ALS-600 input that can probably be reduced to give you more 
>> output power.  I have modified my ALS-600 for QSK operation and it 
>> works great with my K3 (see this month's QST or www.ad5x.com for 
>> details).
>>
>> Phil - AD5X
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>>  
>>
>