[Elecraft] K3 Hardly any Output

[Dick Dievendorff]

Tom, please verify that CONFIG:KPA3 is "PA NOR".

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Tom (HB9DOD)
Sent: Thursday, May 14, 2009 7:59 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Hardly any Output

Hello

Turned my K3 on this afternoon only to find out it has only about 10 Watts
output on full 120 scale..

reset, restored, nothing changed..

Did the whole alignment to find out that on all bands with the 5 watt tx
alignment i can get any higher as 2.7 till 2.8  is goes up a very short time
and comes back to 2.7
Tx Alignmnet with the Utility gave err txg error..

K3 was functioning 100% couple of weeks ago.... 

Also with the 3.11 fw

Any help??

PS this is the second K3 i have in hand with the same problem

Both i could not solve sofar...




73
 Tom                            mailto:hb9dod at hb9d.org


  

-- 
73's
 Tom                          mailto:hb9dod at hb9d.org

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html