[Elecraft] K3 & N1MM for RTTY

[Iain MacDonnell - N6ML]

Terry Dunlap wrote:
> OK...now that my K3 kit is complete I'd like to set up N1MM for CW & 
> RTTY contests.  I can ask this on the N1MM reflector but thought I'd try 
> here first.  Please respond direct if this is OT.
> 
> How do I set up N1MM to have radio control, CW & PTT on the same COM?  

Just do it:) In the N1MM "Configurer", under the "Hardware" tab, check
the "CW" box next to the port you've configured for the K3, then click
on the "Set" button, set DTR to "CW" and RTS to "PTT". Then on the K3,
set CONFIG:PTT-KEY to "rts-dtr".

Beware of this if you're considering SO2R CW with N1MM - it doesn't
like the same serial port being used for rig control and CW in that
case, but it seems OK with one radio.


> Also, I have FSK on another COM, do I set that up in N1MM or MMTTY?

MMTTY. You tell N1MM that you're using FSK under the "Digital Modes"
tab of the "Configurer" (also set TU type to "Souncard" there), but
the specifics of FSK interfacing is configured in MMTTY.

     ~Iain / N6ML