[Elecraft] N3FJP FD Logger

[Joe Subich, W4TV]

> FJP's info states that an interface is necessary to do this. 
> I thought the config function PTT-KEY could be set to use DTR 
> or RTS directly without interfacing? Since the pgm recognizes 
> the K3, and the program can be set to use either for PTT or 
> Keying, what am I missing?

FJP's software will not allow CW, PTT and rig control on one 
port.  To do CW, PTT and Rig control requires three ports with 
FJP software. 




> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill Stravinsky
> Sent: Tuesday, May 12, 2009 10:04 AM
> To: n7ws at yahoo.com
> Cc: elecraft at mailman.qth.net
> Subject: [Elecraft] N3FJP FD Logger
> 
> 
> Wes et al,
>  
> Have used FD Logger for a few years now, and always used 
> somebody else's rig. This year my goal was to get my K3 
> before FD to use with the program keying the rig.
>  
> FJP's info states that an interface is necessary to do this. 
> I thought the config function PTT-KEY could be set to use DTR 
> or RTS directly without interfacing? Since the pgm recognizes 
> the K3, and the program can be set to use either for PTT or 
> Keying, what am I missing?
>  
> Also, I am confused about the power setting in the pgm 
> (none-dtr-rts). I waited 14 years to get my station back on 
> the air and rcvd my K3 #2995 last week. I am thrilled beyond 
> belief with the rig and hope I can get this feature working by FD.
>  
> Help! Pse
>  
> Bill
> K3WJV ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html