[Elecraft] [K3] K3 ACC Connector

[Robert Naumann]

Joe,

Use the ACC for the band switching connection and use the KEY OUT to do the
PTT. In other words, separate cables.

73,

Bob W5OV

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe G
Sent: Monday, May 11, 2009 5:05 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] [K3] K3 ACC Connector


Hello all

I just purchased an Ameritron ALS-600 amp which does band switching. For
bandswitching, they suggest interfacing it with the K3 through their ARI-500
( for cabling reasons).

This set up for the K3 uses the ACC LP Key Out pin to key the amp...not the
Key Out RCA jack.

The Amp will not key...if I put 40W in I get 40W out.
Bandswitching works fine.

If I hook the K3 and the ALS-600 in the non bandswitch mode and use the Key
Out RCA jack the amp keys fine.

I would appreciate any help

Joe
W1JGS


-----
Joe
W1JGS
-- 
View this message in context:
http://n2.nabble.com/K3-ACC-Connector-tp2862150p2862150.html
Sent from the [K3] mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html