[Elecraft] KSB2 Setup issue

[Don Wilhelm]

Matt,

Check the crimp pins in the connector housing - that is the most common 
place for the probe to fail.  The pins must be inserted correctly into 
the housing and the small tabs must lock into the rectangular holes in 
the side of the housing.  If the wire has been inserted too far into the 
crimp pin, the contact will not work correctly and will be deformed the 
first time you plug it into the mating header.

73,
Don W3FPR

Matt Palmer wrote:
> Discovered my freq counter probe is intermittent, trying to fix, but
> ordered a new one from elecraft just in case, guess i'll have to
> shelve the k2 until the new one arrives.
>
> Matt
> W8ESE
>   
>