[Elecraft] [K3] No Power Output

[Arie Kleingeld PA3A]

Bill,

Had the same thing once.
Reloaded the firmware and that solved the problem here.

73
Arie PA3A

-----Oorspronkelijk bericht-----
Van: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] Namens KB1PXD
Verzonden: zondag 22 maart 2009 15:07
Aan: elecraft at mailman.qth.net
Onderwerp: [Elecraft] [K3] No Power Output



Hello everyone,
as of last evening, my K3 is no longer indicating any
power output on the RF meter during transmit.  I've
tried both PTT and VOX, as well as 2 different antennas. (dipole & beam)
When selecting "ATU TUNE", I see the RF meter go to 5W as expected, but
the SWR indicator above only displays "- -".  I've gone through all the
settings and they look correct.  The PWR knob is fully clockwise, I'm
not in test mode, etc., etc.  I've sent an email to Elecraft but I
thought I'd check here as well to see if anyone has 
seen this behavior.  

Thanks,
- Bill
KB1PXD
-- 
View this message in context:
http://n2.nabble.com/No-Power-Output-tp2517063p2517063.html
Sent from the [K3] mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html