[Elecraft] K3 Feature Suggestion (CW)

[Ken Roberson]

Tom,

I also think you should be able to use M1 thru M4 if the K3 is set up to send CW in ssb mode.
The K3 takes care of the offset when in that mode.

73 Ken K5DNL
---------------------------------------------


--- On Sat, 3/21/09, Radio Amateur N5GE <n5ge at n5ge.com> wrote:

> From: Radio Amateur N5GE <n5ge at n5ge.com>
> Subject: [Elecraft] K3 Feature Suggestion (CW)
> To: "Elecraft" <elecraft at mailman.qth.net>
> Date: Saturday, March 21, 2009, 10:20 AM
> I use CW almost exclusively.
> 
> When I'm on 6m up, working weak signal, I send CQ in CW
> while the rig
> is set to USB.  In the CW memories M1, M2, M3 and M4,
> I have messages
> stored for calling CQ, etc., but when the mode is set to
> USB and I tap
> one of the memories, naturally I get a memory saying the
> DVR is not
> installed, which is correct.  
> 
> How much trouble would it be to do an if/else check for the
> DVR and if
> it isn't present, send the CW memory?
> 
> It's not a show stopper, but would be nice to have for
> those of us who
> may never install the DVR.  Or perhaps setting a
> software switch that
> would let us choose which memories we want to send from?
> 
> Not a show stopper, just a thought.
> 
> Tom, N5GE
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>