[Elecraft] K3 Feature Suggestion (CW)

[Robert Naumann]

Why not just listen in CW mode? Is there a difference?

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Radio Amateur N5GE
Sent: Saturday, March 21, 2009 10:20 AM
To: Elecraft
Subject: [Elecraft] K3 Feature Suggestion (CW)

I use CW almost exclusively.

When I'm on 6m up, working weak signal, I send CQ in CW while the rig
is set to USB.  In the CW memories M1, M2, M3 and M4, I have messages
stored for calling CQ, etc., but when the mode is set to USB and I tap
one of the memories, naturally I get a memory saying the DVR is not
installed, which is correct.  

How much trouble would it be to do an if/else check for the DVR and if
it isn't present, send the CW memory?

It's not a show stopper, but would be nice to have for those of us who
may never install the DVR.  Or perhaps setting a software switch that
would let us choose which memories we want to send from?

Not a show stopper, just a thought.

Tom, N5GE

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html