[Elecraft] Independent Bands (F/W Vers. 3.03)

[Bud Semon N7CW]

Thanks for the response Mike.  Your suggestion allows me to select Ant2 for
the sub-receiver and Ant1 for the main receiver, but I still can't select
the RX Ant (where the 6M preamp is) for the sub-receiver - it just kicks me
out of the bset menu.

73, Bud

-----Original Message-----
From: W0MU Mike Fatchett [mailto:w0mu at w0mu.com] 
Sent: Tuesday, March 17, 2009 6:37 PM
To: 'Bud Semon N7CW'; elecraft at mailman.qth.net
Subject: RE: [Elecraft] Independent Bands (F/W Vers. 3.03)

When you set up the 2nd receiver there was a choice to use the 2nd antenna
on the KAT or the Aux input and install the cable.  There is also a menu
choice you can make.  Set it to Ant2 not aux. 


CC Packet Cluster W0MU-1
W0MU.NET or  67.40.148.194

"A slip of the foot you may soon recover, but a slip of the tongue you may
never get over." Ben Franklin 



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bud Semon N7CW
Sent: Tuesday, March 17, 2009 7:29 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Independent Bands (F/W Vers. 3.03)

I can't figure out how to monitor 6M with the sub-receiver, using my PR6 and
6M antenna on Ant2 (which requires me to have the RX Ant on) and tune on 20M
with the main receiver.  I keep getting the message USE AUX.  Re-reading the
notes, it appears that I can't select this combination or am I missing
something?

 

And the Birdie Buster seems to work great!

 

73, Bud  N7CW

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html