[Elecraft] A software lock preventing reverse mode?

[Joe Subich, W4TV]

> My request remains valid. 
> 
> If not Logic 8, if not the next "program XYZ that unexpectedly 
> engages REV" then for those who inadvertently engage REV; it 
> would be a positive feature to disable REV unless intended.

Why?  Normal CW is set by MD3; CW-REV is set by MD7;  Normal 
Data is set by MD6;, DATA_Rev is set by MD9; ... identical to 
both Kenwood and the "new" Yaesu command sets.  The only way 
REV can be set is by sending a specific mode command or using 
the switch emulation command "SWH17;"  

There is no need for an "ignore reverse mode commands" setting. 
The logging application simply needs to properly support the 
the K3/Kenwood/Yaesu command set.  If an author refuses to 
fix the K3 support, he is probably having problems with Kenwood 
and (new) Yaesu rigs as well. 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Gary Smith
> Sent: Tuesday, March 17, 2009 4:55 PM
> To: Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] A software lock preventing reverse mode?
> 
> 
> > Correct.  N1MM has a configuration box to reverse CW sidebands.  If 
> > N1MM can do it, so can Logic 8...if the owner wants to support his 
> > customers.
> > 
> > 73,  Bill
> 
> My request remains valid. 
> 
> If not Logic 8, if not the next "program XYZ that unexpectedly 
> engages REV" then for those who inadvertently engage REV; it would be 
> a positive feature to disable REV unless intended.
> 
> Gary ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html