[Elecraft] A software lock preventing reverse mode?

[David Gilbert]

Fred (and to others that responded to my post),

I never said that I thought the Logic 8 issue was off topic, and I have 
no problem with anyone on this reflector highlighting interface problems 
between any piece of software and any Elecraft rig.   Please reread my 
message.   What I said was that I would greatly prefer that defects in 
said interfaces be corrected by the author of the offending software and 
NOT by adding obscure workarounds to the K3 menu.  Why perpetuate 
complexity in the K3 when the root cause for the problem lies elsewhere?

73,
Dave   AB7E



Fred Bennett N9TA wrote:
> This email group is primarily concerned with solving problems in the use 
> and enjoyment of Elecraft products. While posts which drag on and on 
> related to other products may be out of place, this is THE place to post 
> fixes and info related to making things work. This email reflector has 
> been extremely helpful to me...and I'm sure others as well. Although I 
> own a K2...not a K3....I DO use Logic 8.0, so I am somewhat interested 
> in the subject. It is understandable that those who have no reason to 
> monitor this topic would be dis-interested. I believe patience is in 
> need here....as the topic YOU are interested in may be of NO interest to me.
>
>                 73....de....Fred  N9TA
> ____________________________________________________________________
>
>
>
>
> David Gilbert wrote:
>   
>> That's a Logic 8 problem.  Please enter my vote against polluting the K3 
>> menu with bug fix workarounds for every piece of defective software out 
>> there.
>>
>> Dave   AB7E
>>
>>
>>
>> Gary Smith wrote:
>>   
>>     
>>> Hi,
>>>
>>> When I use Logic 8 there is a nice feature where there is a DX Spot 
>>> log. This reflects on the air spots and evaluates my database to let 
>>> me know what is posted that I need on which band for which award.
>>>
>>> When I click on a call, the K3 automatically goes to what band and 
>>> mode was posted and even moves the transmit/SPLIT to the DX's 
>>> listening freq if posted. 
>>>
>>> Almost perfect except for some reason, when engaging this, the  
>>> command also moves the K3 to listen in the reverse position. 
>>>
>>> I've learned to click on the spot in logic and then press the ALT on 
>>> the K3 to put the signal to normal but I'd like to be able to have 
>>> the ability in the config menu to tell the K3 to ignore the REV 
>>> comand unless physically selected by the ALT button or just to ignore 
>>> it totally unless I intentionally enable it again.
>>>
>>> Possibilities?
>>>
>>> Thanks,
>>>
>>> Gary
>>> KA1J
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>   
>>>     
>>>       
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>   
>>     
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>