[Elecraft] [K2] C6 4.7pf cap & K60XV option?

[Mike-WE0H]

Hi Don,

OK I will do that. Couldn't figure out one way or the other so I put the 
cap on the bottom side of the header after I installed the header. Guess 
it was shunting some signal from where it was supposed to be going...hi 
hi...

Thanks much,
Mike
WE0H



Don W wrote:
> Mike,
>
> Yes, remove C6 from the RF board and after that, re-peak the 40 and 60 
> meter bandpass filter.
>
> 73,
> Don W3FPR

>
> Mike-WE0H wrote:
>> Was I supposed to remove the C6 (4.7p) cap when I added the K60XV 
>> option? I have it soldered on the bottom of the RF board from pin1 to 
>> pin 3 of J15.
>>
>> Thanks,
>> Mike
>> WE0H
>> K2 6698