[Elecraft] K3 Manual change suggestion

[Bob Tellefsen]

The RX OUT/RX IN ports allow you to insert
whatever you want in the receive path for the
main rcvr.
It could be a filter, a preamp, an attenuator or
whatever.
73, Bob N6WG

----- Original Message ----- 
From: "W0MU Mike Fatchett" <w0mu at w0mu.com>
To: "'Ken Widelitz'" <widelitz at gte.net>; <elecraft at mailman.qth.net>
Sent: Saturday, March 14, 2009 3:18 PM
Subject: Re: [Elecraft] K3 Manual change suggestion


> It is also unclear what the real purpose is for the rx ant out.  From what 
> I
> have been told if I want to share my rx antennas with the two receivers 
> then
> I should use a T or splitter and go to each input separately.
>
> I would think that RX Ant Out would allow you to take the RX antenna to
> another rig or something.
>
> If I recall correctly was it to be used for some type of flitering?
>
>
> "A slip of the foot you may soon recover, but a slip of the tongue you may
> never get over." Ben Franklin
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Ken Widelitz
> Sent: Saturday, March 14, 2009 3:54 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 Manual change suggestion
>
> I've been studying the Main/Sub RX Antenna Routing section with an eye
> towards how the RX ANT OUT is used. Unless I'm missing something, it isn't
> clear in the manual. The answer, YOU NEED TO TURN ON THE RX ANT, is
> contained, in a different context, in the following reflector post from
> Wayne, which should be integrated into the manual.
>
>
>
>
>
>
>
> 73, Ken, K6LA / VY2TT
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html