[Elecraft] K1 - low resistance measurement on front panel board

[Mike Clarke]

Hi all,

I'm in the process of building my first Elecraft rig (and first ever
radio project); a K1.

I've reached the stage of doing the resistance checks on the front panel board,
one of which my K1 is failing.

J1 pin 16 to ground should be between 15 and 18kOhms; but I am
measuring about 8k.

I have tried:

a) inspecting the board visually, and can't see any obvious bridges or
bad joints;
b) measuring R7 in circuit - 3.45kOhms
c) measuring R6 in circuit - 7.76kOhms
d) measuring R6 out of circuit - 12.8kOhms

Any suggestions as to what I've done wrong would be most appreciated!

Thanks,

-- 
Mike, M0PRL