[Elecraft] Building a KX1

Don Wilhelm w3fpr at embarqmail.com
Fri Mar 13 15:32:10 EDT 2009


Ron,

Yes, you have the order of things correct.  If you are a very 
experienced builder and have great confidence in your ability to make 
things work the first time through without interim testing, then you can 
integrate the KX1 and the KXB3080, but I would not recommend that for 
the first time through.

If you do want to try it, you could build the KX1 without installing L7, 
C1, C26 and C27.
Then follow the KXB3080 instructions *only* through page 4.
At that point, you may test the KX1 on 40 and 20 meters.
Once that combination is aligned working well, start on page 5 of the 
KXB3080 manual and finish it.

One more note - do *not* add the KX1 Power Mod (included with the 
KXB3080 kit) unless your KX1 is not capable of producing 3.5 watts with 
a 13.8 volt power supply (3 watts with a 12 volt supply).  Most of the 
KX1s with the newer PA transistor do not need the power mod, and running 
much over 4 watts for a period of time can damage the components in the 
PA output circuit.

73,
Don W3FPR

Ron Bower wrote:
> Okay... I have ordered a KX1 with the ATU, paddle, and 30/80 board and was
> wondering if there was a recommended order for construction.
>
> I was finally able to find some older messages that seemed to run almost
> unanimous to proceed with the KX1 basic kit first, then add the options one
> at a time. I did see that I could mount L6 on the opposite side of the PC
> board in anticipation of the 30/80 board, but otherwise should just follow
> the manual and complete the KX1.
>
> So... That was it, and it didn't seem necessary to repost and get flamed for
> not having research enough.
>
> But, now that it's out there... Does anyone have any suggestions for me ?
>
> I'm expecting the package to arrive next Tuesday.
>
> 73,
> Ron, AC2C
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.237 / Virus Database: 270.11.13/1999 - Release Date: 03/13/09 05:59:00
>
>   


More information about the Elecraft mailing list