[Elecraft] Elecraft Digest, Vol 59, Issue 22
Don Wilhelm
w3fpr at embarqmail.com
Thu Mar 12 22:45:41 EDT 2009
Sarath,
I do not seem to be able to find the content that you are adding, nor
the portion of the digest that you are replying to.
Please use top posting so your comments appear at the top of your posts,
and delete the non-relevant portions of the digest. so we can see what
you are commenting about.
73,
Don W3FPR
Sarath - Vu3rsb wrote:
> -----Original Message-----
> From: elecraft-request at mailman.qth.net
> Sent: 12 March 2009 07:19
> To: elecraft at mailman.qth.net
> Subject: Elecraft Digest, Vol 59, Issue 22
>
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. Re: Whaddayaknow... passed the Extra [END of Thread]
> (Eric Swartz - WA6HHQ, Elecraft)
> 2. K3 KRX3 ANT (Evert Bakker (PA2KW))
> 3. Re: K3 KRX3 ANT (W0MU Mike Fatchett)
> 4. Re: K3 KRX3 ANT (W0MU Mike Fatchett)
> 5. K2 KDSP clock doesn't work (johna at arnoldassoc.com)
> 6. Re: K3 KRX3 ANT (Don Wilhelm)
> 7. K3: Do you "Juice" your K3? (Lee Buller)
> 8. Re: K3: Do you "Juice" your K3? (w8zn at comcast.net)
> 9. Re: K3: Do you "Juice" your K3? (David Ferrington, M0XDF)
> 10. Re: K3: Do you "Juice" your K3? (Darwin, Keith)
> 11. Re: K3: Do you "Juice" your K3? (Jack Smith)
> 12. Re: K3: Do you "Juice" your K3? (Ralph Tyrrell)
> 13. K2-Split/Rit/Xit led (Yves Dussault)
> 14. Re: K3: Do you "Juice" your K3? (Jack Regan)
> 15. Re: K3: Do you "Juice" your K3? (or KX1) (Don Wilhelm)
> 16. Announcement: SOC Marathon Sprint (Bob Patten)
> 17. Re: K3: Do you "Juice" your K3? (Ron D'Eau Claire)
> 18. Re: K3: Do you "Juice" your K3? (Dave Hachadorian)
> 19. Re: K3: Do you "Juice" your K3? (w8zn at comcast.net)
> 20. Re: K3: Do you "Juice" your K3? (Alan Price)
> 21. Re: K3: Do you "Juice" your K3? (Julian, G4ILO)
> 22. Re: K3: Do you "Juice" your K3? (Ed Muns)
> 23. KREF-EXT Option (SM6TUW)
> 24. Re: [QRP-L] Announcement: SOC Marathon Sprint (Bob Patten)
> 25. Re: K3: Do you "Juice" your K3? (David Gilbert)
> 26. Re: K3: Do you "Juice" your K3? (Jack Smith)
> 27. Re: K3: Do you "Juice" your K3? (Ron D'Eau Claire)
> 28. Re: K3: Do you "Juice" your K3? (Bill W4ZV)
> 29. Re: K3: Do you "Juice" your K3? (Iain MacDonnell - N6ML)
> 30. Re: K3: Do you "Juice" your K3? (W0MU Mike Fatchett)
> 31. K2 vs K3 ? (John Jeffers)
> 32. K2/KAT100-1 mobile bracket (2Cents)
> 33. Re: K2 vs K3 ? (Bill Johnson)
> 34. Re: K2 vs K3 ? (W5CEM)
> 35. K2 vs K3 (K2ZLS)
> 36. Re: accurate time (Oliver Johns)
> 37. Re: Boom Mic/Stereo Headsets for the K3 (ab2tc)
> 38. Re: K3: Do you "Juice" your K3? (Lance Collister)
> 39. Re: K2 vs K3 ? (Mike-WE0H)
> 40. Re: Boom Mic/Stereo Headsets for the K3 (Oliver Johns)
> 41. Re: K2-Split/Rit/Xit led (KC9QQ)
> 42. Re: K2 vs K3 ? (Randy Moore)
> 43. k2 vs k3 (Brett Gazdzinski)
> 44. Re: K3: Do you "Juice" your K3? (Augie Hansen)
> 45. Re: K2-Split/Rit/Xit led (Don Wilhelm)
> 46. Re: K2-Split/Rit/Xit led (Don Wilhelm)
> 47. K3 Data Mode Transmit Issue (Joe Barger)
> 48. Re: [K2] SN 6688 lives! (NZ0T)
> 49. Re: K2 vs K3 ? (Mike-WE0H)
> 50. K3 Time Keeper v0.1 (David Fleming)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: 11 Mar 2009 09:15:00 -0700
> From: "Eric Swartz - WA6HHQ, Elecraft" <eric at elecraft.com>
> Subject: Re: [Elecraft] Whaddayaknow... passed the Extra [END of
> Thread]
> To: <john at carltonhouse.eclipse.co.uk>
> Cc: don at w3fpr.com, daleputnam at hotmail.com, elecraft at mailman.qth.net
> Message-ID: <3319607721.6540610 at smtp.vzwmail.net>
>
> Its time to end the threads on Extra Class etc. We are exceeding the list threshold for OT posts.
>
> Eric WA6HHQ
> Elecraft List Moderator
> _..._
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 11 Mar 2009 17:55:42 +0100
> From: "Evert Bakker \(PA2KW\)" <evert at pa2kw.com>
> Subject: [Elecraft] K3 KRX3 ANT
> To: "'Elecraft Discussion List'" <elecraft at mailman.qth.net>
> Message-ID: <F25CC7CAB70A4C638B37A49116B40D3D at pa2kw>
> Content-Type: text/plain; charset="us-ascii"
>
> I'm installing my KRX3 now and trying to figure out which configuration to
> install.
>
> After reading the KRX3 manual and the K3 manual and looking at the pictures
> on page 40 (K3 manual),
>
>
>
> I do have KAT3 and KXV3 installed.
>
> I do have a separate RX antenna for the low bands.
>
> I want to use the SUB-RX on the higher bands together with the main RX with
> the same antenna and accept an increase of the NF by 3 dB.
>
>
>
> Do I need the AUX RF BNC installed?
>
>
>
> 73's, Evert PA2KW
>
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 11 Mar 2009 11:04:37 -0600
> From: "W0MU Mike Fatchett" <w0mu at w0mu.com>
> Subject: Re: [Elecraft] K3 KRX3 ANT
> To: <evert at pa2kw.com>, "'elecraft'" <elecraft at mailman.qth.net>
> Message-ID: <C86683A8618042BF80556A2D079AF32F at hamtower>
> Content-Type: text/plain; charset="us-ascii"
>
> I do not need to hook up the aux cable. You may wish to do so for future
> use. You might want to listen on a beverage for the lowbands on one
> receiver and your tribander on 20m so in that case you would want both. You
> can select which antenna to use in the menu, main or aux.
>
>
> "A slip of the foot you may soon recover, but a slip of the tongue you may
> never get over." Ben Franklin
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Evert Bakker (PA2KW)
> Sent: Wednesday, March 11, 2009 10:56 AM
> To: 'Elecraft Discussion List'
> Subject: [Elecraft] K3 KRX3 ANT
>
> I'm installing my KRX3 now and trying to figure out which configuration to
> install.
>
> After reading the KRX3 manual and the K3 manual and looking at the pictures
> on page 40 (K3 manual),
>
>
>
> I do have KAT3 and KXV3 installed.
>
> I do have a separate RX antenna for the low bands.
>
> I want to use the SUB-RX on the higher bands together with the main RX with
> the same antenna and accept an increase of the NF by 3 dB.
>
>
>
> Do I need the AUX RF BNC installed?
>
>
>
> 73's, Evert PA2KW
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 11 Mar 2009 11:09:09 -0600
> From: "W0MU Mike Fatchett" <w0mu at w0mu.com>
> Subject: Re: [Elecraft] K3 KRX3 ANT
> To: "'W0MU Mike Fatchett'" <w0mu at w0mu.com>, <evert at pa2kw.com>,
> "'elecraft'" <elecraft at mailman.qth.net>
> Message-ID: <926FEBABE8334499BC84336CA6E917EB at hamtower>
> Content-Type: text/plain; charset="us-ascii"
>
>
> You do not need to hook up the aux cable. You may wish to do so for future
> use. You might want to listen on a beverage for the lowbands on one
> receiver and your tribander on 20m so in that case you would want both. You
> can select which antenna to use in the menu, main or aux.
>
>
> "A slip of the foot you may soon recover, but a slip of the tongue you may
> never get over." Ben Franklin -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Evert Bakker (PA2KW)
> Sent: Wednesday, March 11, 2009 10:56 AM
> To: 'Elecraft Discussion List'
> Subject: [Elecraft] K3 KRX3 ANT
>
> I'm installing my KRX3 now and trying to figure out which configuration to
> install.
>
> After reading the KRX3 manual and the K3 manual and looking at the pictures
> on page 40 (K3 manual),
>
>
>
> I do have KAT3 and KXV3 installed.
>
> I do have a separate RX antenna for the low bands.
>
> I want to use the SUB-RX on the higher bands together with the main RX with
> the same antenna and accept an increase of the NF by 3 dB.
>
>
>
> Do I need the AUX RF BNC installed?
>
>
>
> 73's, Evert PA2KW
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ------------------------------
>
> Message: 5
> Date: Wed, 11 Mar 2009 13:10:34 -0400
> From: "johna at arnoldassoc.com" <johna at arnoldassoc.com>
> Subject: [Elecraft] K2 KDSP clock doesn't work
> To: elecraft at mailman.qth.net
> Message-ID: <380-220093311171034433 at M2W033.mail2web.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Hi all,
>
> I've never been able to get my clock to work in the K2 outfitted with the
> KDSP unit.
>
> I have changed batteries numerous times and measured the battery when
> installed. Unit will set time and appear to keep good time, but next time I
> turn unit on I get EE EE EE and am unable to set time.
>
> Any thoughts from this great group of Elecraft users???
>
> 73, John WA6YSY
>
> --------------------------------------------------------------------
> myhosting.com - Premium Microsoft? Windows? and Linux web and application
> hosting - http://link.myhosting.com/myhosting
>
>
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 11 Mar 2009 13:11:26 -0400
> From: Don Wilhelm <w3fpr at embarqmail.com>
> Subject: Re: [Elecraft] K3 KRX3 ANT
> To: evert at pa2kw.com
> Cc: 'Elecraft Discussion List' <elecraft at mailman.qth.net>
> Message-ID: <49B7F0BE.8040105 at embarqmail.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Evert,
>
> Yes, I believe using the AUX RF BNC is the preferred solution for your case
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.237 / Virus Database: 270.11.10/1996 - Release Date: 03/11/09 20:42:00
>
>
More information about the Elecraft
mailing list